After update the status LED flashes and SSD not available

Good morning, second problem after the V1070 update, the internal HD 1 TB DR+ is not recognized so I can't record...

Regarding your questions:

@Pedro65 schrieb:
Good morning, I would like to report that after installing the V1070 update on the Stellar 55'', when I turn off the TV the white light continues to flash.
does this happen to any of you too? Thanks

Have you already removed AC power once? This should solve such an issue.

@Pedro65 schrieb:
Good morning, second problem after the V1070 update, the internal HD 1 TB DR+ is not recognized so I can't record...

Also here, have you already removed AC once? The SSD is not available at all, also not in "Sources"?

Best regards,
Dominik from Loewe-Team

Hi Dominik, thanks for your reply.
1) I followed your advice, unplugged the TV, and when I turned on the power, the SSD appeared and worked properly.
However, when I turned off the TV with the remote and turned it back on, the SSD disappeared again.
2) Regarding the status LED, the problem was NOT solved. When I turn off the TV, the LED stops for 5 seconds and then starts flashing. Thanks.