Apple Airplay/Apple Home zw. keine Festplatte verfügbar nach Update 1070
Kommentare
-
Hallo Dominik,
seit dem Update habe ich probleme mit der internen Festplatte. Wenn ich den TV am Netzschalter ausschalte, ist die Festplatte beim nächsten Start da, nach einiger Zeit verschwindet die Festplatte. Wenn der TV im Standby ist, blinkt die LED dauerhaft weis. Auch ein Werksreset hilft nicht. Die Festplatte ist dann zwar erstmal wieder in der Auswahlliste, verschwindet dann aber spätestens nach dem Start aus dem Standby.
0 -
Hallo Dominik,
ich habe genau das gleiche Problem wie Stefan664. AirPlay habe ich nun versuchsweise deaktiviert. Mal sehen, ob die interne Festplatte jetzt aktiv bleibt. Im Standby blinkt die weiße LED auch bei ausgeschaltetem AirPlay.0 -
Good morning everyone. I found the code to reset the TV to its factory settings, which the dealer said should have solved the problem. I went through the entire setup process, added the Sky decoder and DVD player, and the SSD DR+ drive reappeared in the list of connected devices. I ran several tests, and everything worked fine for a few hours. I turned the TV off, and when I turned it back on, the situation was the same as before the reset—the SSD DR+ disappeared, and the white status LED still flashes in standby mode. I notified the dealer, who will investigate the possible cause of these problems that appeared immediately after the V1070 update. I noticed that when I turn it on, only the LOEWE logo appears, while when the SSD is visible, the initial logo is LOEWE Tizen OS. I forgot to mention that the AirPlay function works perfectly.
1 -
@Stefan664 schrieb:
Hallo Dominik,seit dem Update habe ich probleme mit der internen Festplatte. Wenn ich den TV am Netzschalter ausschalte, ist die Festplatte beim nächsten Start da, nach einiger Zeit verschwindet die Festplatte. Wenn der TV im Standby ist, blinkt die LED dauerhaft weis. Auch ein Werksreset hilft nicht. Die Festplatte ist dann zwar erstmal wieder in der Auswahlliste, verschwindet dann aber spätestens nach dem Start aus dem Standby.
Bei meinem Stellar besteht das Problem immer noch, gibt es eigentlich mittlerweile eine Lösung für das Problem?
0
Hi, Loewe-Fan!
Kategorien
- 688 Alle Kategorien
- 596 National
- 6 Allgemeine Informationen
- 25 Neuigkeiten
- 452 TV
- 36 Chassis SL9
- 12 Chassis SL8
- 69 Chassis SL7
- 66 Chassis SL5
- 54 Chassis SL4
- 27 Chassis SL3
- 10 Chassis SL2
- 14 Chassis SL1
- 57 Ältere Chassis
- 113 Audio
- 3 multi.room amp
- 19 klang mr 1/3/5
- 8 klang s1/s3
- We. HEAR 1/2
- We. HEAR pro
- 91 International
- 5 General information
- 18 News
- 32 TV (international)
- 5 Chassis SL9
- Chassis SL8
- 8 Chassis SL7
- 4 Chassis SL5
- 2 Chassis SL4
- 5 Chassis SL3
- Chassis SL2
- Chassis SL1
- 5 Older Chassis
- 36 Audio (international)
- multi.room amp
- 6 klang mr 1/3/5
- 2 klang s1/s3
- We. HEAR 1/2
- We. HEAR pro
- 3 General